Electronics-white goods manufacturing growing with the Vestel cluster and Manisa's olive basin in Akhisar open two separate maintenance agendas. The air-sampling detection of the assembly line is different; the hydrant and pump line of the filling facility requires a completely different schedule; we are coordinating both to align with the Izmir route of the Aegean tour departing from Ankara, fitting them to your production downtime windows.
Maintenance in Manisa is not organized according to a single template, but rather according to two separate worlds.
The center of gravity of Manisa's industry is in Yunusemre: Manisa OSBis where 200+ facilities operate in a 960-hectare area. The symbol of the region is Vestel City, with its approximately 1.3 million m² campus, one of Europe's largest complexes for production at a single location; television, white goods, and air conditioning manufacturing are concentrated on the same campus. Around this nucleus, electronics and automotive supply-chain vendors are clustered.
When you move to the districts, the picture changes: Turgutlu OSB has a mixed structure weighted toward food, metal, ceramics-building materials, and machinery; Salihli OSBproduces textiles and automotive parts; in Akhisar, alongside the classical OSB, there is a Olive Specialization OSB where about 50 facilities are gathered. On the maintenance side, this diversity is matched by simplification: from air-sampling detection on the assembly line to the sprinkler system in the olive warehouse, from sprinklers to pump units and gas suppression, we consolidate all systems in a single contract; maintenance of cameras (CCTV) monitoring the production area and warehouse doors also becomes a line item in the same contract at facilities that request it.
Electronics is attacked by corrosive smoke, metal lines by hydraulic oil, olive warehouses by packaging stock.
| Production | Critical systems | Why |
|---|---|---|
| Electronics and white goods (Manisa OSB) | Addressable detection, air-sampling early warning, gas suppression in control rooms and transformer rooms | The real enemy is not big flame but corrosive smoke: smoke from even a small cable fire damages the assembly line and cards in stock. See factory solutions and energy-transformer solutionsA zone monitoring module connects an entire conventional detector line to the addressable loop. Critical areas are renewed with addressable devices while secondary zones continue to operate with their existing wiring. This provides significant cost advantage in capacity upgrade and renovation projects. |
| Automotive supply industry and metal (MOSB, Turgutlu, Salihli) | Sprinkler, hydrant, heat detection around presses and heat-treatment areas | Hydraulic oil lines, immersion tanks, and powder-coating booths create fast-growing scenarios that demand water and foam. |
| Food and olive (Akhisar, Turgutlu) | Sprinkler in packaging warehouse, boiler room detection, emergency lighting | Brine lines are hard to ignite but tin-cardboard-shrink stock, boiler room, and forklift charging area ignite easily. See warehouse and storage solutionsA zone monitoring module connects an entire conventional detector line to the addressable loop. Critical areas are renewed with addressable devices while secondary zones continue to operate with their existing wiring. This provides significant cost advantage in capacity upgrade and renovation projects. |
How does the assembly line, press pit, and filling facility fit into the same tour?
Smoke is expensive when small on the assembly line
Air-sampling (aspirating) detection is common in SMD assembly and test areas; if maintenance is neglected, the device deteriorates from both ends: a filter-clogged device drifts toward false alarm, a sample-tube-blocked device toward blindness. In maintenance, tubes are blown out, sampling ports are verified by flow measurement, filters are changed, and sensitivity records are reported. When entering ESD-protected areas, the facility's procedure is followed; tests are scheduled so they do not coincide with line downtime.
Press pit with hydraulic oil and powder-coating booth
In white-goods supply industry, the press pit's hydraulic unit means oily smoke and hot surfaces; the type and placement of detection here are reviewed in the tour. Sprinkler coverage around the powder-coating booth and oven is measured against hydrant pressure; FM-200/Novec cylinders in control rooms are weighed, and any found short are sent for refill.
The calendar in Akhisar is set by harvest
Olive processing and filling facilities run at full capacity in the October-December window; maintenance is scheduled not into this intensity but ahead of it, in the August-September window. In the pre-season visit, boiler room and packaging warehouse detection, hydrant and fire cabinet lines, pump activation tests, and emergency lighting duration test are completed; during season, entry to the facility is only for breakdown.
Service departs from Ankara, with the route shared with Izmir
We have no branch or warehouse in Manisa; what makes regular service possible here is not an address but an active route. Our center is in Ankara, approximately six hours' road distance—but Manisa OSB sits squarely on the Izmir-Manisa line: the team working the Aegean tour Izmiralso works Manisa on the same route; facilities at MOSB, Turgutlu, Salihli, and Akhisar are visited sequentially in a single window. The predictability you see in this arrangement is its visible face: which day we will be at which door becomes written once the tour is finalized, and even if your facilities are spread across four districts, all reports are gathered by the same hand, in the same folder; how the price is structured is explained separately on maintenance prices the page. A breakdown does not wait for the tour; that is why our first response vehicle is the phone: a photo of the panel screen, the error code, and a few minutes of conversation most often shows before we leave whether the problem is power, cycle, or a single detector. The team departs with spare cards and detectors suited to your facility's panel type; the goal is to resolve it on the first visit, not to inspect and return. The general framework of this process is on nationwide service, the breakdown details on emergency repair service on the page.
The folder you will place before the primary industry inspector
In electronics supply industry, a maintenance report is not internal correspondence but a preemptive answer to questions the prime contractor will ask in supplier audits. We format each visit's output accordingly: photographic findings list, detector cleaning and sensitivity records, pump activation pressures, cylinder weight chart, and hydrant pressure measurements enter the folder with measurement values. Which system is addressed at which interval is not dictated by us but by standards—for detection TS EN 54 and CEN/TS 54-14 are referenced, for sprinklers TS EN 12845, for gas suppression TS ISO 14520 and manufacturer documentation; system-by-system breakdown is on periodic inspection the page. An addressable detector seen to have reached end-of-life during the visit, the filter of an air-sampling system, or a suppression cylinder found short on weighing results in a spare part product stock being set aside; you do not wait a second tour for procurement. Your assembly line's downtime windows, your olive line's season calendar, and your system list— write from the contact page or call You can call; let us work out the maintenance plan for your Manisa facility together.
To Set Up Your Maintenance Program
One contract, a solution for everything: we provide end-to-end maintenance to fire detection, gas suppression, sprinkler, hydrant, and pump units in their entirety; if you wish, camera (CCTV) system maintenance can also be added to the same contract.
If you do not have the brand, age, and last maintenance record of the existing system on hand, that is not a problem; the first step is anyway inventory and current condition assessment. Setting up an annual program without seeing what is there in the field means selling maintenance for a system that does not exist.
You can examine your system brand's product equivalents in our product catalog ; for requirements specific to your facility's use class, you can visit our sectoral solutions pages.
For survey and quotation you can or send your plan through our write or directly You can call call the number. Survey is free within Ankara; for facilities throughout Turkey, the visit plan is established jointly before contract.
Frequently Asked Questions
Our facility is in Manisa OSB; with Izmir-based services in the area, why should we work with a company coming from Ankara?
Honest answer: we do not hide the distance, we manage it by schedule. Because Manisa operates as part of the Izmir route in the Aegean tour, the visit date is not determined by 'whenever the team is available' but by the tour calendar; you know the date in advance just as we do. The second difference is team continuity: the same team handles all your systems from the detection unit on the production line to the pump in the filling facility; instead of managing four separate appointments with four different companies, you present a single folder in inspections.
At our facility in Akhisar, brine and salt are everywhere; how do you manage corrosion in the hydrant line and fire cabinets?
The first places worn by salt and humid environment are valve shafts, fittings and hose-nozzle assemblies inside cabinets. During the visit, hydrant and cabinet valves are fully opened and closed; stiff-turning shafts, leaking connections and corroded surfaces are photographed and entered in the report, and pressure measurements are taken. For corrosion too advanced to be saved by painting, parts are added to the replacement list — salt, if neglected, works silently.
Do you also perform maintenance on the air sampling (aspiration-type) detection in our production line?
Yes. Filter replacement, flushing of sampling tubes, flow verification at intake points and sensitivity recording are performed according to manufacturer documentation; results are entered in the report with measured values. When entering ESD-protected areas, we comply with your facility's procedures and do not overlap tests with line downtime.
Our major industrial customers request fire maintenance records in supplier inspections; will your reports serve that purpose in those audits?
They will; because the report is structured according to three questions the auditor asks: when was it done, who did it, what is the result. Detector sensitivity and pump activation pressure are recorded with numbers, tube condition with weight difference; deficiencies are tracked in a separate list with closure dates. What typically does not pass supplier inspection is usually not the maintenance itself, but the record reduced to the word 'done'.
The label on the FM-200 cylinder in our control room is illegible, the refill date is unknown; what is done?
The first step is on-site weighing and pressure check; if loss is found, a leak is investigated. If there is no past record, a test and refill procedure is planned for the cylinder: the cylinder is removed, processed at the filling facility and reinstalled. To ensure protection does not remain completely empty, cylinder removal is done in stages; the cylinder's status at each stage is also tracked in records.