Fire system maintenance across Türkiye+90 312 385 15 66
Industry Solution

Hotel Fire Safety

Sleeping user: addressable detection, multisensor room detector and bedside sound level.

AddressableMulti-SensorVoice Announcement
Solutions / Hotel Fire Safety

In the hotel, the user sleeps and does not recognize the building. These two facts determine the entire design: detection must be early, warning must be evocative, and direction must be clear.

Fire risks in this environment

  • User sleeping and unfamiliar with the building
  • Fire caused by in-room cigarettes/electrical appliances
  • The impact of false alarm on guest satisfaction
  • Kitchen and laundry fire load
  • Smoke spread in floor corridors

Regulations and standards

Fire detection and audible warning are mandatory in accommodation facilities within the scope of BYKHY. Minimum 75 dBA sound level should be provided at the bedside in sleeping places; voice evacuation components should be EN 54-16/24.

Recommended technologies

Hotel Fire Safety — the right solution combination and the reasons behind it.

01

Multisensor Detector

The combination of smoke+heat in the room reduces the false alarm caused by steam/cigarettes.

Related products →
02

Addressable Detection

Instantly shows which room the alarm is coming from.

Related products →
03

Voice Announcement (VA/PAVA)

He directs the guest, who does not know the building, to the escape route.

Related products →
04

Kitchen Hood Extinguishing

Cooking line protection in the hotel kitchen.

Related products →

Typical system architecture

Each room is protected by an addressable multisensor detector; the corridors have an optical detector and a notification button. It works in integration with the fire panel voice announcement system, and a floor-based evacuation scenario is defined. Siren/speaker placement is made by calculating the bedside sound level in sleeping areas.

Common field mistakes

  • Not calculating the bedside sound level in the room
  • Producing false alarms with a single sensor detector in rooms
  • Not carrying the hallway announcement to the rooms
  • Skipping the hood extinguishing in the kitchen

Frequently Asked Questions

Which detector should be in the hotel room?

Addressable multi-sensor (smoke+heat) detector is preferred; it protects early detection while lowering the false alarm.

What should be the sound level in the sleeping area?

A minimum of 75 dBA must be provided at the bedside; in addition, the ambient noise must be above at least 5 dBA.

Hotel Fire Safety — request a quote for your project

Engineering, installation, commissioning and maintenance — from a single source. Free site survey within Ankara.