Asenware AW-D130A Addressable Reflective Optical Beam Smoke Detector

The AW-D130A is a reflective-type optical infrared beam smoke detector with both transmitter and receiver housed in a single body; it detects the presence of smoke by measuring the attenuation of the light beam reflected from a reflector positioned on the opposite surface. With a detection range of 5-160 meters, it covers a wide area with a single device in high-ceiling spaces where frequent placement of point-type detectors is impractical. It operates at 24 V via the addressable loop or with a separate 12-24 V DC power supply; standby current does not exceed 10 mA, alarm current does not exceed 15 mA, and built-in line isolator support prevents a short circuit in the loop from disabling the entire line. It is classified as a beam-type smoke detector under EN 54-12 and is used with Asenware fire alarm panels of the AW-FP100, AW-FP128, AW-FP200, and AW-FP2166 series. Since alignment and commissioning operations are performed via infrared remote control, physical access to the device is not required after installation for fine-tuning.